G Grizzly Backflow & Plumbing
Cora, WY · 82925 Local testers · Utility reports filed

PVB Testing in Cora, WY Near Me

PVB (pressure vacuum breaker) testing in Cora, WY for lawn sprinklers and irrigation lines. Call (833) 990-5874.

Call (833) 990-5874 More services
PVB Testing in Cora, WY
Call us
(833) 990-5874
Certified testers
Reports filed with your utility
RPZ, DCVA and PVB
Price talked through by phone

PVB Testing in Cora, WY

The pressure vacuum breaker, or PVB, is the brass device sticking out of the ground near your sprinkler system with a bonnet on top and two small test cocks. It is the most common backflow preventer on residential irrigation.

A PVB test checks two things. The air inlet has to open when pressure in the body drops to about 1.0 psi. The check valve has to hold at least 1.0 psid in the direction of flow.

The usual failures are a cracked bonnet from a freeze, a stuck poppet, or a check that leaks because the rubber has gone hard after years in the sun. Water spitting out from under the canopy when the system starts is a sign the poppet is not seating.

A PVB must sit at least 12 inches above the highest sprinkler head it serves. If yours is lower, it may not pass inspection even with good readings.

Grizzly Backflow & Plumbing connects Cora, WY homeowners with testers for PVB testing and backflow prevention repairs. Call (833) 990-5874.

How it works

Four steps to backflow testing in Cora, WY

  1. 01

    Grab your notice

    Have the utility letter handy. It lists the device, serial number and due date.

  2. 02

    Talk it through

    Call (833) 990-5874. We go over the device type and the price before anything is booked.

  3. 03

    Test day

    A certified tester reads each check and the relief valve on a calibrated gauge.

  4. 04

    Report filed

    The report goes to your water utility, and you keep a copy for your records.

Coverage

Backflow Testing Services Across Cora, WY

Backflow testing for the neighborhoods and ZIP codes around Cora, WY.

ZIP codes we serve

82925

Backflow testing FAQs

Questions about backflow testing

Questions we hear most often about PVB Testing in Cora, WY.

Talk to a person
How long does a backflow test take?
A residential PVB or double check test usually takes 20 to 30 minutes. Large commercial and fire line assemblies take longer.
What does a failed backflow test mean?
A check valve or the relief valve did not hold its required pressure differential. The device needs repair or replacement, then a retest before a passing report can be filed.
What is a cross-connection?
Any point where drinking water piping can come into contact with a non-potable source. Common examples are a hose in a bucket, a boiler fill line and an irrigation system.
Who sends the test report to the water utility?
The tester usually files it, either on the utility's paper form or through its online portal. Ask for a copy for your own records.
Is fire sprinkler backflow testing different?
Yes. Along with the standard check valve test, NFPA 25 calls for an annual forward flow test on fire line backflow assemblies. Results often go to both the water utility and the fire authority.

Book a backflow test

Backflow Test Due in Cora, WY? Call now.

Certified testers for backflow testing in Cora, WY. Call (833) 990-5874 and we go through the device and the price before anything is booked.

(833) 990-5874
Phone · (833) 990-5874
Call (833) 990-5874 Enquire